A/C Repair and Replacement

Duct Replacement Houston TX (2)
Condenser cleaning houston TX
Overview

A/C Repair and Replacement Services Houston TX

Take Air offers the highest quality service at the most affordable prices.

CALL TAKE AIR DUCT CLEANING SPECIALISTS LLC HOUSTON TX FOR BEST A/C REPAIR AND REPLACEMENT SERVICES!!!

Professional A/C Repair and Replacement Company

If your air conditioner or furnace doesn’t turn on, runs noisily, has a hot compressor, or you have any other problems, simply call TakeAire and we will take care of rest, restoring your air conditioner or furnace back to perfect working order. We are experts at repairing and servicing all brands and models of air conditioning systems and /or heating and furnace units.
 

HVAC Service and Maintenance

  • There is nothing better for your heating and/or air conditioning system than annual maintenance.
  • Annual maintenance allows your system to work at peak efficiency year in and year out.
  • A system that is maintained annually experiences considerably fewer breakdowns, virtually eliminating the need to pay for costly repairs.
  • With annual maintenance, you’ll enjoy the peace of mind in knowing that your system is saving you money on your utility bills every time it comes on. In some instances, the energy savings are even enough to pay the cost of the planned annual maintenance service.

Air Conditioner Maintenance Tips

Air conditioners moves heat from one area to another, much like the cooling system in a frostless refrigerator. There is a coil inside the unit called the evaporator, and it is the component that gets cold. A fan pulls heated air from the room across the evaporator coil, and then pushes the cooled air into the living area. Warm air is constantly being pulled back through the air conditioner unit and across the coil, creating a complete recirculating process. In addition, the air conditioner helps to lower the humidity level in your home, and thereby enhance the comfort of living areas. The moisture in the heat-laden air tends to collect upon the chilled coils of the evaporator, much as condensation does on the outside of a glass of iced tea during summertime.

What happens to the heat?

It is carried by the refrigeration system to an exterior coil called the condenser. The condenser, which is hot to the touch, is exposed to the outside air. The circulating outside air absorbs the heat, dispelling it outside your home. Meanwhile, air is continually pulled through louvers in the sides of the cabinet and pushed out through the coils. This process eventually eliminates enough of the hot air in your home to make it comfortable.

The same heat-removal principles apply as much to an automobile’s air conditioning system as they do to a centralized home or window unit. In a car, the evaporator (which is located behind the dash) removes the heat and transfers it to the condenser (usually located in front of the car’s radiator). In a home central air conditioning system, the condenser and compressor may be remote (located on the roof or as a separate unit somewhere outside the house). The evaporator of a central air conditioning system is placed within the supply duct plenum of the furnace. The compressor acts as a pump to circulate the refrigerant through the system. Therefore, you can control the temperature in your home with a thermostat which simply turns the compressor on and off to maintain the degree of coolness you desire. In most cases, the system’s blowers continue to run even when the compressor is off. Fan motors consume only a small amount of electricity, and they help keep air circulating within the room even when the cooling system itself is not required. Without continual air circulation, the cold air would collect near the floor, a condition known as “stratification” which can be quite uncomfortable.

All air conditioners require regular maintenance, consisting primarily of the cleaning and replacing of filters at specified intervals (once every 30 days is not too often). Dirty filters, as you would expect, reduce the air flow and lower the efficiency of the unit. In severe cases, filters that fail to do their job can even damage the evaporator and the compressor. Therefore, you must clean or change the filters regularly.

Filters made of foam or aluminum are washable, which means you can flush these filters with a hose from the back side.

Some air conditioner manufacturers recommend that you then coat the clean filter fibers with a special adhesive to trap particles as the air passes through the filter. Fiberglass filters, however, cannot be cleaned; you must replace fiberglass filters when they become dirty.

If a filter has been clogged for a long period of time, lint and dirt can work their way through to clog the evaporator coil itself. You can remedy this situation by applying a special cleaning solution or a strong liquid detergent to the coil. Spread the solution on the coil and allow it to soak for a few minutes. Then spray the coil with water, and brush away the residue from the front. Continue to flush the coil until it appears to be free from lint and dirt once again. The water you use to rinse the evaporator coil will flow out the same drain line that carries off condensate water when the air conditioner is operating. Such water usually flows across the base pan to a sump located at the bottom of the condenser fan blade. This fan blade has a special ring around it (called a “slinger” ring) that rises through the puddle at the bottom of the condenser. The slinger ring helps eliminate dripping – except in the most humid weather – and it also increases the efficiency of the condenser.

 

Forced warm-air heaters require a filter to clean the air as it is being circulated.

The filter is generally a pad of loosely packed fiberglass which traps dust and keeps it from being blown back into rooms. Permanent filters of plastic or wire mesh are washable; the throwaway fiberglass types must be replaced.

Filters should be cleaned or replaced monthly during the heating season. Do not put it off.

A dirty filter will block the air flow, decrease the efficiency of the system, and can even cause extensive damage.

The only visible parts of most home heating units are the registers (or radiators) which allow the heat to flow out into a room.

Registers may be used with either gravity or forced warm-air systems. In the gravity type arrangements, the register outlets are usually located low in the floor or along the baseboard of a room. Gravity system outlets are usually placed along the interior walls of a home, to give better and more economical heating. Floor grills located along outside walls are generally return vents for the cool air being displaced. Do not use an abrasive contact cleaner, since it can scratch or otherwise damage the bimetallic points.

If the thermostat is a mercury vial-type, no cleaning is necessary. The mercury unit is sealed during manufacture.

If heat comes out of the registers but the blowers do not operate, the trouble is in the fan or fan motor, or there is a leak or blockage in the duct work.

In some combination cooling and heating systems without a heat pump, there is a plate which may be slid in or out of the duct nearest the cooler. It is removed to allow cool air to flow through the ducts during summer. In the winter, the plate is inserted in order to keep cool air from leaking into the duct system as it is being used by the heating blowers. Check your system to see if it incorporates one of these plates and, if so, that the plate is in the right position for the heater/cooler in use.

Work Gallery

Testimonials

Jarris Martin
Jarris Martin
2023-10-06
Take Air did a great job cleaning my dryer vent and my air ducts. Nick was great in explaining what the work entailed and I’ll definitely use them for my hvac needs.
Marites Zoleta
Marites Zoleta
2023-10-05
Excellent job. I strongly recommend using Take Air services.
Kam Yip
Kam Yip
2023-10-05
Exceptional service
Mahmoud Abdelrahman
Mahmoud Abdelrahman
2023-09-22
Great company, recommend it, would like to use it again in future.
Werner Johnson
Werner Johnson
2023-09-19
Had take air clean our ducts after a major renovation resulted in lots of dust in the house. Nick's team did a very professional job ensuring our system operated efficiently. As a follow-up, Nick and his team came to the house to address a low air flow problem from one of our vents. He took care to analyze the problem and quickly came up with a solution that fixed this. We now have good air flow coming through this duct system. I would recommend Take Air to anyone that needs duct work. Werner J.
Kraina Myer
Kraina Myer
2023-09-14
Great service overall and excellent customer service. Highly recommend with great pricing. Thank you!
Maria Sandoval
Maria Sandoval
2023-09-14
I will recommend the service to my relatives.
Pat Citizen
Pat Citizen
2023-09-12
The service was excellent with expertise and great communication skills! I recommend this great service for your home.
Nina Tomlinson
Nina Tomlinson
2023-09-11
Quality workfor the price quoted. Very professional. Responsive and on time.
Bill Eddingfield
Bill Eddingfield
2023-09-10
The technician (Nick) was extremely helpful and was very patient with all my questions. He was able to explain exactly what needed to be done and worked me to make sure everything was satisfactory.

Get A Quote

HVAC Repair and Replacement Coupon

10% Off Senior Citizen

10% off on all services for senior citizens

Free Inspection & Estimate

Videos

Related Articles

Dust Be Gone: How to Reduce Dust Presence in Your Home

Dust Be Gone: How to Reduce Dust Presence in Your Home

Dust is an inevitable part of our lives, but its impact can be significantly reduced with proactive measures, with air duct cleaning playing a pivotal role.

Call NOW